Alamo 02968915C manual Machete Head Motor Plate Attachement, See Figure Mnt-B-0019

MAINTENANCE

MAINTENANCE

60” MACHETE HEAD MOTOR PLATE ATTACHEMENT

Before installing the rods run two nuts on each end of the rods down 2". Place a hardened Flat washer on each end. see FIGURE Mnt-B-0018.

Place the straights rods in the holes marked 1 thru

4.See FIGURE Mnt-B-0019.

Once the rods are in the holes through the Buck Plate align the rods through the holes on the mount plate and place the mount plate on top of the relief block. The valve block bolts on top of the motor are not equally spaced. Make sure the pockets align accordingly. See FIGURE Mnt-B-0020.

MACHETE BOOM 3/09 Maintenance Section 4-10

©2009 Alamo Group Inc.