MAINTENANCE
TANK FILL
Check the sight gauge and add more Mbil DTE or AW ISO VG 68 hydraulic fluid (Refer to list of rec- ommended fluids) to bring the level up between 1/2 to 3/4 on the gauge. See Figure
MAINTENANCE
BLADES
Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when they are worn excessively, bent, deformed, or out of balance.
Blades should always be replaced in pairs. Blades of different weights can cause serious imbalance and damage to the machine and personnel. When replacing blades, take care to replace the blade bolts, nuts, and washers.
MACHETE BOOM 3/09 | Maintenance Section |
©2009 Alamo Group Inc.
