Extending/replacing the main memory | Main memory |
6.2Extending/replacing the main memory
ÊOpen the server as described in chapter “Preparation” on page 19.
ÊLift the air cowl upwards to remove it as described in section “Removing the air cowl” on page 22.
Removing installed memory modules
2
1
1
Figure 13: Removing a memory module
ÊFold the ejection levers outwards on both sides of the corresponding slot (1). This will cause the memory module installed in the slot to be ejected.
ÊIf the slot was already equipped: Remove the memory module (2).
34 | Options Guide | RX200 S5 |
