Fujitsu RX200 S5 manual Modules with electrostatic-sensitive components, ESD label

Safety instructions

Modules with electrostatic-sensitive components

Systems and components that might be damaged by electrostatic discharge (ESD) are marked with the following label:

Figure 1: ESD label

When you handle components fitted with ESDs, you must observe the following points under all circumstances:

●Remove the power plug before installing or removing components containing ESDs.

●You must always discharge yourself of static charges (e.g. by touching a grounded object) before working.

●The equipment and tools you use must be free of static charges.

●Only touch the components at the positions highlighted in green (touch points).

●Do not touch any exposed pins or conductors on a component.

●Use a grounding cable designed for this purpose to connect yourself to the system unit as you install components.

●Place all components on a static-safe base.

IYou will find a detailed description for handling ESD components in the relevant European or international standards (DIN EN 61340-5-1, ANSI/ESD S20.20).

18 Options Guide RX200 S5