OPERATION
3. TRACTOR REQUIREMENTS
Operating the blade with a tractor that does not meet the following requirements may cause tractor or blade damage and be a potential danger to the operator and passersby.
Tractor Requirements and Capabilities
•ASABE approved
• Tractor Safety Devices | Slow Moving Vehicle (SMV) emblem, lighting, |
| PTO master shield |
•Tractor Horsepower
| - | 10’ 225 | HP, 12’ 175 | HP | |
| - Front Wheel | 10’ | 200 | HP, 12’ 160 | HP |
• | Hitch - 3 Point Hitch | CAT |
| ||
| - Lifting Capacity | 10’ | 2260 lbs.; 12’ 2400 lbs. | ||
• | Front End Weights | As needed to maintain 20% weight on front axle |
3.1 ROPS and Seat Belt
The tractor must be equipped with a
Operate this Equipment only with a Tractor equipped with an approved roll-
3.2 Tractor Horsepower
The power required to operate a blade is determined by the tractor PTO horsepower. For most operating conditions, the 2500 rear blade requires a tractor with at least 200 HP for 10’ and 160 HP for 12’. Operating the blade with a tractor that does not have adequate power may damage the tractor engine. Exceeding the recommended horsepower may cause blade damage by overpowering the unit in heavy operating conditions.
2500 01/11 | Operation Section |
© 2011 Alamo Group Inc.