Alamo A84B manual Drawbar-Pull Type Mower

OPERATION

The optional Heavy-Duty CAT II-III Quick Hitch can be mounted to tractor’s with either a CAT II or

III3-Point hitch or tractor’s equipped with a CAT II or III Quick Hitch.

3.5 Drawbar-Pull Type Mower

For equipment operating at 540 RPM, the tractor drawbar must be positioned at a 14” distance from the hitch point to the PTO shaft end for proper operation and minimal wear to the driveline.

If attaching the mower tongue clevis to a 3-point hitch drawbar supported by the lower lift arms, the attaching point must be extended past the main bar to allow for turning without binding the clevis and bar. Lift arm stabilizers must be used with this type of drawbar to prevent the mower from swaying from side to side.

OPS-R- 0061

A84B 03/07 Operation Section 4-7

© 2007 Alamo Group Inc.

OPERATION