OPERATION
OPERATION
•Ensure rubber deflectors are in position and not damaged. Replace worn, broken, and missing sections immediately.
•Ensure the rollers are in good condition and rotate freely.
•Ensure the driveline integral shield is in good condition and rotate freely.
•Inspect that all bolts and screws are in position and are properly torqued.
•Inspect the condition of the wings and rear section drive belts.
•Ensure the slip clutch (rear mower section only) is properly adjusted and the friction plates are not frozen together. Reference the Maintenance Section for proper slip clutch maintenance.
•Ensure the slip clutch shield and drive belts shields are in place and in good repair.
•Ensure the tractor PTO master shield is in place, lowered and in good condition.
•Inspect oil level in gearbox and replenish if needed. A low oil level is a warning sign that the gearbox may be cracked or its seal is damaged and needs to be replaced.
•Check the oil level in tank and replenish if need. NOTE: Do not fill the tank with oil above the level of the sight gauge. Over filling the tank with oil after initial filling may result in oil being discharged through the air filter on the top of the hydraulic tank.
•Perform scheduled lubrication as specified in the maintenance section.
FX17/FX21 02/11 | Operation Section |
© 2011 Alamo Group Inc.
