Alcatel 799A Inserting or removing the SIM card, Insert the memory card, Charging the battery

Models: 799A

1 45
Download 45 pages 37.56 Kb
Page 11
Image 11

Inserting or removing the SIM card (1)

You must insert your SIM card to make phone calls.

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted.To remove the card, press the bottom and slide it out. Please power off your cellphone before you remove the SIM card.

Insert the memory card:

To release the microSD card holder, slide it in the direction of the arrow and lift it. Then insert the microSD card with the golden contact downward. Finally, turn down the microSD holder and slide it in the opposite direction to lock it.

(1)Check with your network operator to make sure that your SIM card is 3V or 1.8V compatible. The old 5 Volt cards can no longer be used. Please contact your operator.

19

IP3192_799A_UM_Eng_USA_07_101220.indd 19-20

Charging the battery

Connect the battery charger

Charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The mains socket must be near to the cellphone and easily accessible (avoid electric extension cables).

When using your cellphone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery ( ).

The charge is complete when the animation stops.

20

2010-12-20 13:47:25

Page 11
Image 11
Alcatel 799A manual Inserting or removing the SIM card, Insert the memory card, Charging the battery