4.2 Profile management
Add a new profile:
1, Click <New>.
2, Input the correct parameters you get from the operator.
Note: Profile Name/Number/APN is the mandatory to be filled. 3, Click <Save>.
Edit a profile:
1, Select the profile from the connection profile list. 2, Change the parameters.
3, Click <Save>.
Delete a profile:
1, Select the profile from the connection profile list. 2, Click <Delete>.
3, On the pop up dialog ”are you sure to delete this profile?”,click <OK>. Note: the default profile can not be deleted.
Set as default:
1, Select the profile from the connection profile list. 2, Click <Set default>.
3, On the pop up dialog ”are you sure to set this profile as default?”, click <OK>. Note: Once set the profile as default,(D) will be added as a mark.
4.3 Network
Network Mode:Automatic/4G only/3G only/2G only, default is automatic.
Network Selection: Automatic/Manual, default is automatic.
Select a Network Manually
1,Choose Manual in the network selection. 2,Click <Apply>.
3,Click <Refresh> to list the available network. 4,Choose the network and Click <Select> to register.
Note: For the Services,LTE,UMTS,GSM.For the Status, Active( the network registered), Available( the network can be used).
4.4 PIN management
Enable PIN
1, When PIN is disable, click <Enable>, PIN input page is displayed.
8
