Alcatel Carrier Internetworking Solutions 7800, 7700 manual Common CLI Commands, Write memory

Common CLI Commands

The following table lists some basic CLI commands that will help you get acquainted with the CLI interface. Enter each command exactly as shown. For complete descriptions of these commands, refer to your CLI Reference Guide.

write memory	Saves current configuration
	changes to the /flash/working
	directory’s boot.cfg file. For
	more information, refer to
	page 26.

show running-directoryDisplays the current running directory. For more informa- tion, refer to page 39.

vlan	Creates a new VLAN.
show vlan	Displays a list of VLANs
	configured on the switch.
ip interface	Configures an IP interface to
	enable IP routing on a VLAN.
show chassis	Displays basic configuration
	and status information for the
	switch chassis.
show module	Displays basic information for
	switches in a stacked configu-
	ration.
show ni	Displays basic hardware and
	status information for a stand-
	alone switch, or for all
	switches installed in a stacked
	configuration.

show cmm	Displays basic hardware and
	status information for a stand-
	alone switch, or for the primary
	or secondary switches installed
	in a stacked configuration.
show system	Displays basic information
	about the switch.
show microcode	Displays the version of
	software currently installed on
	the switch.
session timeout	Modifies the amount of time
	before Telnet and console
	sessions time out.
who	Displays all active login
	sessions (e.g., Console, Telnet,
	FTP, HTTP, Secure Shell,
	Secure Shell FTP)
exit	Ends the current Telnet or
	console session.

34 CLI Basics March 2005