Ethernet Management Port (EMP)
Cable Requirements
There are specific cable type requirements (i.e., straight- through or crossover) based on the location of the Ethernet Management Port (EMP) and the type of device to which it is connecting. Refer to the information below:
Refer to the diagram below for console/modem port and EMP locations.
7700
EMP to a Switch | Straight- |
| through |
|
|
EMP to a Computer or | Crossover |
Workstation |
|
|
|
Note. For information on manually configuring Ethernet ports for cabling requirements, refer to “Configuring Ethernet Ports” in the Network Configuration Guide.
x |
| |
9x |
| |
11x | CONSOLE | |
| /MODEM | |
13x |
| |
15x |
| |
17x | EMP | |
LINK | ||
| ||
19x | ACT | |
|
A
1
2 |
| NI |
|
3 |
| ||
4 | |||
CMM
B
5
6 |
NI |
7 |
PWR
PS1
PS2
PS3
8 | |
For detailed information on all port types, including console/ modem, EMP, Ethernet, and Gigabit Ethernet, refer to the module descriptions on pages 51 through 59.
18 Connections and Cabling | March 2005 |