Loading Software
The following section describes the procedure for loading new release software to your switch. Note that the procedure varies slightly for
Note. For detailed information on loading software and working with directories in both
Non-Redundant Configurations
3Using your FTP client or the CLI’s rm command, delete all .img files from the /flash/working directory. You can use the asterisk (*) wildcard to delete all .img files at once. For example:
Important. Do not delete the boot.cfg file. Otherwise, any configuration changes you have saved will be lost. Also, do not delete files from the /flash/certified direc- tory.
4Using your FTP client, upload all required .img files from the new software release to the /flash/working direc-
1Verify that all required image files from the new soft- ware release are located on your computer’s hard drive or a
2Establish an FTP session to the switch, then access the /flash/working directory.
Note. Before attempting to establish an FTP session, be sure that you have first unlocked the FTP session type via the aaa authentication command. Otherwise, an FTP login error will occur. See “Unlocking Session Types” on page 22 for more information.
tory.
FTP
CMM
Working Directory
boot.cfg
Fbase.img
Fos.img
Frelease.img
Feni.img
Additional required files
March 2005 | Loading Software 41 |