Shredder Operation

This shredder is equipped with an Auto Start/Stop smart sensor, which allows the unit to automatically start when an item is placed into the feed opening or paper is placed in the auto-feed tray and to stop as soon as the item travels completely through the feed opening.

Shredder Capacity

•The shredder will shred up to six letter size sheets of 20 lb. bond paper at one time when inserted in the entry slot for paper. The auto-feed tray will hold up to 80 sheets of paper. When shredding Blu-ray, DVD or CD discs or credit cards, only insert one piece at a time.

Using the Auto-Feed Tray

1.Make sure the power switch is in the ON position ( – ). (The power LED will be lit.)

2.Slide no more than 80 sheets of paper into the Auto-Feed Tray, sliding them under the Feed Cover until you meet some resistance.

3.Holding the papers in place, press the Auto-Feed Load Button. This will allow you to slide the papers a bit further under the Feed Cover. When you again meet resistance, release the papers and the Auto-Feed Load Button.

4.The Auto Start/Stop smart sensor will signal the shredder to start. Paper in the Auto-Load Tray will be fed in batches to the shredder until the Auto- Load Tray is empty, at which point the shredder will stop.

5.Once you confirm that batches of paper are feeding into the shredder from the Auto-Load Tray, you can leave the RoboShredder to complete the task. No further intervention is required.

4www.aleratec.com