Overview
34 QuadraSynth Reference Manual
The User Interface: Display, Functions,Pages, and Parameters
The key to the QuadraSynth user interface is the combination of the Display and four
Quad Knobs/Buttons [1] Ñ [4] located toward the right of the front panel. The
Display constantly informs you of the QuadraSynthÕs status.

About the Display

MIDI
CHAN
MIX PROG
12345678910111213141516
EFFECT
PRESET
EDITED PRESET
EDITED PRESET
EDITED
EDITING: MIX PROGRAM SOUND 1234EFFECT CLIP
PROGRAM – ASSIGN – VOICE LEVEL EFFECT–LEVEL
PITCH FILTER AMP RANGE MOD EFFECT NAME
PLFO FLFO ALFO PENV FENV AENV TRACK
CONFIG REVERB DELAY MIX MISC. GLOBAL
PAGE: 12345678910111213141516COMPARE

"MixPrgName"

NUMBER TYPE

MIDI Monitor/Selection Strip
Current Mix, Program and Effect Strip
Function List
Page Number Strip
Mix/Program/Effect/Parameter Name Strip
Quad Knob/Button Label Strip
Quad Knob bar-graph meters
Compare indicator
Clip indicator
Global indicator
Editing Status
Quad Knob Cursor
Page Cursor
MIDI Channel Cursor
Function Cursor
Note: This illustration shows all display flags turned on at once. Actual displays show only
some of these at any time.
The display has eight main sections:
¥MIDI monitor and selection strip. Selects different MIDI channels for the
programs in mix mode (a thick underline indicates the selected channel),
monitors keyboard and incoming MIDI activity (thick lines above active channel
numbers indicates activity either from the keyboard or MIDI In), and chooses the
basic MIDI channel in Program mode.
¥Current Mix, Program and Effect strip. Shows the currently selected Mix and/or
Program and its associated Effect.
¥Editing Status. Indicates what you are editing (either Mix Edit, Program Edit, or
Effects Edit), after pressing [SELECT]. Ò1 2 3 4Ó indicates which sound (1Ñ4) is
selected for editing when in Program Edit mode; or, which effect send (1Ñ4) is
selected for editing when in Effects Edit mode. Press [EDIT 1] to cycle through
the four sounds/sends. When Edit 4 mode is selected (press [EDIT 4]), all four
numbers appear, to indicate that all four sounds are available for simultaneous
editing (Edit 4 mode is available in Program Edit mode only).
¥Functions list. Displays the various editing functions available in a particular
editing mode. Use the FUNCTION [¬] and [®] buttons to select a function, as
indicated by the small line (cursor) underneath one of the words in the list. When
a function is chosen, the page number strip and right-hand side of the display
will show values related to that function. Only the functions used by the current
edit mode will be displayed and selectable.