Algolith FRS-1002-MD The Administrator Level, Adjusting Parameters, Admin Login, Admin Logout

Guide to installation and operation FRS-1002-MD / FRS-1002-MD-LG-PA

Adjusting Parameters

The FRS-1002 card provides an extra level of control and security with an administrator password-protected level, in which the parameters of the card can be modified and controlled. The non password-protected level or «read only» mode, where no password is entered, allows users to view the various settings, but does not permit changes to be made.

The Administrator Level

To protect against unwanted modification of operating parameters, the interface provides an administrator level (password-protected) mode which allows users the right to modify card settings.

Admin Login

The Admin Login section can be found in the Card Setup window. Enter the password «algolith» to gain full access to the administrator level.

Once the password is entered, the Card Setup window changes to allow modification to the various settings. Allow a few seconds for the password login to take effect.

The administrator mode remains active until you click the Logout button.

Admin Logout

Use the Logout button to quit the administrator level. Once you have logged out, the Card Setup window reverts back to the «read only» mode and the preset settings cannot be modified.

Allow a few seconds for the logout to take effect.

Login to administrator level

15