Guide to installation and operation | FRS-1002-MD / FRS-1002-MD-LG-PA | |
| | |
LG-PA
The Video Setup window for the FRS-1002-MD-LG-PA allows for configuration of the same video parameters as the FRS-1002- MD, however, additional settings are available for the card’s Legalizer and Proc Amp.
Proc Amp
Legalizer
Proc Amp
The proc amp allows for adjustments to the Brightness, Contrast, Saturation and Hue levels of the video image. These parameters can be set as follows:
Parameters | Range |
| |
Brightness | -10% to 10%, in 0.5% increments |
| |
Contrast | -6dB to 6dB, in 0.5dB increments |
| |
Saturation | -6dB to 6dB, in 0.5dB increments |
| |
Hue | -20º to 20º, in 1º increments |
| |
Legalizer
The FRS-1002-MD-LG-PA ensures video signals conform to industry-defined «legal» limited ranges. The legalizer allows users to adjust the clipping for Luminance (Y) and Chrominance (Cb/ Cr) as follows:
Parameters | Range |
| |
Clip Y upper level | 64 to 1019, factory setting: 940 |
| |
Clip Y lower level | 4 to 1019, factory setting: 64 |
| |
Clip Cb/Cr upper level | 0 to 511, factory setting: 448 |
| |
Clip Cb/Cr lower level | -512 to -1, factory setting: -448 |
| |
