| FRS-1002-MD / FRS-1002-MD-LG-PA | Guide to installation and operation |
| | |
Introduction
About this manual
This user guide covers both the FRS-1002-MD and FRS-1002-MD-LG-PA cards. The FRS-1002 cards share many common features and the general content of this user guide applies to both products. Content and features specific to either product will be outlined by these graphic headers, so they can be easily associated with the proper product. Enjoy your reading.
MDLG-PA
Overview
The Algogear™ FRS-1002-MD Frame Synchronizer is designed to synchronize asynchronous video feeds on a reference, in both standard and high-definition SDI environments on up to two channels. It supports standard definition and high-definition video formats including 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 576i/50, and 480i/59.94.
The FRS-1002 will automatically drop or repeat video input frames to maintain synchronization to the house sync signal. Additional delay can also be added to the synchronizing process in pixel, line or frame increments. Up to 11 additional frames of delay can be added in HD.
Users can also adjust embedded audio (16 channels, 4 groups) with audio parameter controls including gain, mute and delay adjustment (up to 10 seconds). The Audio Sample Rate Converter can be disabled, or set to automatically detect non-PCM data and disabled on a per-input basis. Video and audio delay can be controlled independently.
For added flexibility, the FRS-1002-MD-LG-PA contains a video proc amp, allowing users to adjust video parameters such as brightness, contrast and saturation. Hue control is available for SD standards. In addition, the video legalizer ensures video signals conform to industry-defined «legal» limited ranges.
Main Features
•Dual channel SD/HD frame synchronizer
•Performs frame repeat or drop to align video to input reference
•Removes invalid video switching using multiple freezing modes
•Supports synchronous 16 channels (group 1 to 4) of
48 KHz audio (PCM 20-bits and 24-bits)
•Audio resampling
•Supports pass-through of non-PCM audio data
•Adjustable audio delay independent of video
•Audio mixing capabilities (level, mapping)
•SNMP Support
•Built-in audio tone generator and video test patterns
•Controlled by easy-to-use Dashboard software