Algolith operation manual FRS-1002-MD / FRS-1002-MD-LG-PA

FRS-1002-MD / FRS-1002-MD-LG-PA Guide to installation and operation

Installation and setup

The FRS-1002 card is installed in the openGear frame.

openGear frame

The FRS-1002 card requires a BNC rear output module. Depending on the frame model you purchased, your frame may be equipped with a fixed 100 BNC rear panel.

openGear frame with a fixed 100 BNC rear panel

Your frame model may have a modular rear panel, to accommodate different types of cards. You will then need to purchase and install a 10 BNC single rear module for each FRS-1002 card in your openGear frame.

openGear frame with a modular rear panel

For information on the openGear frame and how to install your FRS-1002 card and your rear modules, see the DFR-8310-C Multi Definition Digital Products Frame and Power Supply (PS-8300) User Manual.

8