Note: Centrifuge must always switch on with the same velocity and direction as the washing rotation. This rotation is downward when you are on the dirty laundry side of the machine.

3.2 Usage of washing machines with micro control

Refer to Programming Manual for micro control information.

4. PERIODIC MAINTENANCE

4.0 Every day

Clean dust filter located below the tub once a day when using gas heating.

4.1Every week (0.5 h)

•Clean the soap trays.

•Clean the machine using a dry or slightly humid cloth (not dripping).

4.2Every month (1 h)

•Check the condition of the shockbreakers (no oil traces should be visible on the outside of the shockbreaker).

•Check that the frictional gliders between which the tub-drum assembly is wedged laterally make contact correctly (if the pressure is not sufficient, withdraw a spacer of the frictional arm connection).

•Check the condition and waterproofing of the steam circuit for those machines that are heated by steam.

•Check the working condition of the gas heating system (boiler, safety and filter).

•Check the working condition of the unbalance detector switch.

4.3Every 3 months (2 h)

•Check and retighten the main bolts, when necessary.

•Clean the protective filters of the electronic valves.

•Grease the rod bearings of the drum lightly.

•Clean the steam nozzle on machines with steam heating.

-21-