Attention: All products used are harmful and must be handled with caution. Read the recommendations of the product suppliers carefully.
Before all manipulation: you must use appropriate protective clothing, e.g. gloves, boots, glasses, respiratory masks, etc.
Detergent:
•Fill the soap trays with the corresponding products when starting a cycle.
•The detergents for washing and
o There are several different types of detergent, and some of them are more easily dissolved in water. Consult your supplier, who will provide indications.
Bleach:
•5 to 10 g of 12° bleach per litre of water.
•Never surpass the lower marking of the siphon of the bleach tray.
Softener:
•Consult supplier. The doses vary according to the products used.
3.1.3 Unbalance and direction of rotationWhen you receive the message “unbalance fault“ before ending a cycle, you must restart the cycle (refer to Ch. 1.4.2).
If the unbalance persists, check the following points:
•Machine has insufficient load:
Loads must be in the following ranges (dry laundry weight) UHM027D............. 19 to 27 kg
UHM033D............. 22 to 33 kg UHM049D............. 38 to 49 kg UHM067D............. 52 to 67 kg
•Water drainage defective.
•Long pieces of clothes tangle and create knots.
•Heterogeneous load of clothes, differing in type, weights or size.
• Poorly adjusted water level: | Upper level ... | 140 mm |
| Lower level ... | 60 mm |
•Shockbreaker got stuck: the symptom of this problem is an escape of oil on the skirt of the shockbreaker.
•Wrong direction of rotation of the centrifuge.