6. TROUBLESHOOTING
6.1 Checks
•The electrical power supply.
•The protective fuses.
•Water supply interruption.
•Filter blocking.
•Water pressure failure.
•Waterproofing of the drainage system.
•The driving belts.
•The water levels.
Attention: When the water levels are not correct, consult reseller and replace the pressure switch.
•When the drainage is obstructed, clean it.
•When the machine vibrates, check the following:
oIt is loaded with a heterogeneous load of laundry. o Its load is too small.
o It is overloaded.
o Check the condition of the shockbreakers.
o Check that the lateral frictional gliders exert enough pressure.
•When the machine experiences frequent unbalance problems or when an oil trace appears on the body of a shockbreaker, the shockbreakers must be changed.
6.2 Other breakdowns
•When other breakdowns or unusual noises are produced (scrubbing, knocking, etc.) interrupt work and contact the manufacturer immediately, describing the problem in detail.