1.2.6 Programming
Of the integral type with a microprocessor, regulation of:
•Four soap trays.
•Admission of hot, cold and/or soft water.
•Bath levels adjustable.
•Temperature adjustable from 0 to 90°C with microprocessor.
•Reduced mechanical washing motion for delicate laundry.
•Normal mechanical washing motion.
•Intermediate and final centrifuge.
1.3Working principle
The following operations: loading the dirty laundry, loading the various detergents, and starting and controlling the operations by means of the control panel, are all done on the "dirty laundry" side of the machine.
Once the program is finished, the drum ports are automatically aligned with the "clean laundry" side for the Aseptic machines (the laundry may then be unloaded on the other side of the separation wall, in another room, without risking contamination of the clean laundry by contact with the dirty laundry) or “dirty laundry” side (for the CS machines).
1.4 Security
1.4.1 Total protection against opening doors
This protection is designed to prevent accidents that might be caused by opening a porthole while the drum is rotating.
•Depending on the machine type, either one or two magnetic latches inhibit the opening of the porthole(s) of the tub.
•The microprocessor orders their release automatically.
•After centrifuging the release of the latches is retarded by about 90 seconds.
In case of an electrical outage and after verifying that the drum has come to a complete stop, it is possible to unlock the doors by take away the front panel under the door and pulling down the small cord.