1.GENERAL WORKING PROCEDURE
1.1Description
•Correct usage in accordance with design:
o The dirty laundry is loaded into the front part of the machine and the clean laundry is unloaded from the rear part of the machine, using portholes situated opposite to the loading ports (for the Aseptic machines) or into the front part of the machine (for the CS machines).
o When a separating wall is constructed at the middle plane of the machine this will then avoid any contact between the dirty and the clean laundry.
•Simple usage:
o Loading and unloading of the laundry through one or two large ports opening by 180°.
•
o Control of the machine by a microprocessor with five standard programs - washing types. It provides the possibility to create 25 other programs according to your requirements.
•No concrete base is required. However, a stable and level floor is absolutely necessary.
•No vibrations are transmitted to the floor.
•The machine only requires one electrical connection, one connection for the heating system of the machine (electricity or steam or gas) and one channel for the drainage of used water.
•Various types of detergents may be used:
o Classical detergent in powder form or liquid detergent supplied by a dosing pump.
Note: The supplier of the liquid detergents must carry out the adaptation of the dosing pumps and their electrical connection (since the system is specific for each type of product).