Switch the ON/OFF rocker switch on the control module to the ON position.
Opening Door
Use left hand to press and hold the door unlock button located on the lower right front of the control panel. Use right hand to turn door handle clockwise and swing the door left to open. See Figure 3.
MD004J
Figure 3
The door will not open if the timer pointer is not in the vertical position at the top of the dial. If the pointer is not vertical, the timer must be
1.Press and hold the START button. The timer will begin
2.Release the START button when the timer stops advancing.
3.Wait one minute.
4.The door unlock button will be enabled, allowing the door to be opened.
Operation
Loading
CAUTION
Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.
SW025
Load the machine to full capacity whenever possible, but do not exceed the rated
Partial loads are a waste of energy, water, and chemicals, and cause greater machine wear than full loads. Partial loads also increase the possibility of a severe
WARNING
Never operate the machine with a bypassed or disconnected
SW010
When loading is complete, ensure that all fabric is inside the basket. Then close and lock the door. The machine should not start or run unless the door is both closed and locked.
CAUTION
Check the door safety interlock daily before the machine is placed in operation.
SW024
NOTE: When washing items which may disintegrate or fragment, such as mop heads or sponges, use laundry nets to prevent drain blockage.
F232088 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 13 |