Operation
Cycle Execution
NOTE: The following description is for the factory- preset program. Prewash times, wash times, final extract times, fill levels, and water temperatures may vary depending on jumper configuration. See the Programming section for more details.
The program timer advances one step every thirty seconds, except during fills.
Prewash
After the START button has been pressed, the door unlock button is disabled, the drain valve closes, the red “ON” indicator light illuminates, and the water inlet valve(s) opens to fill the machine with water to high level.
The door unlock button will remain disabled and the red “ON” indicator light will remain illuminated for the duration of the cycle.
The cylinder rotates clockwise at wash speed during each fill.
The amber indicator light labeled “WASH” illuminates during fill, heat, and agitation steps.
External chemical supply signal output 1 energizes and supply dispenser compartment 1 flushes throughout the duration of this fill.
When high water level is reached, the water valve(s) closes and the washing action begins.
Standard washing action is as follows: 12 seconds rotation clockwise at wash speed, a
The Bright Colors cycle uses a gentle washing action: 3 seconds rotation clockwise at wash speed, a 12- second pause, then 3 seconds rotation counterclockwise at wash speed.
After two minutes of washing action, the drain valve opens.
Wash
After the machine has drained, the drain valve closes and the water inlet valve(s) opens to fill the machine with water to low level.
External chemical supply signal output 2 energizes and supply dispenser compartment 2 flushes throughout the duration of this fill.
External chemical supply signal output 1 energizes and supply dispenser compartment 1 flushes throughout the duration of this fill.
On standard models, the amber indicator light labeled “BLEACH” illuminates after water level is reached and remains illuminated for 1 minute. The machine resumes the washing action once low water level is reached. External chemical supply signal output 3 energizes and supply dispenser compartment 3 flushes once low water level is reached.
On models equipped with auxiliary heat, the timer will stop and the heating system will activate once the water level is reached. The timer will resume once cycle temperature is achieved, illuminating the amber indicator light labeled “BLEACH,” energizing external chemical supply signal output 3, and flushing supply dispenser compartment 3 for 1 minute.
When the wash step is completed, the drain valve opens. After the machine has drained, the machine performs a
Rinse 1
After the intermediate extract step, the machine closes the drain valve and opens the cold water inlet valve to fill the machine to high level.
Once high level is reached, the washing action resumes for 90 seconds.
The drain then opens. After the machine has drained, the machine performs a
Rinse 2
Rinse 2 is identical to rinse 1.
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232088 |