Alliance Laundry Systems EC001F, UW35M2, UW60M2 manual 22

Programming

Mechanical Timer Cycle Time Options

Jumper Setting	Prewash	Wash	Rinse 1	Rinse 2	Rinse 3	Final	Cycle
						Spin	Time*
None	4	8	1.5	1.5	1.5	4	27.5
1a to 3a	4	4	1.5	1.5	1.5	4	23.5
1a to 3a to 3b	--	4	1.5	1.5	1.5	4	18.5
1a to 3a to 3b to 5b	--	4	1.5	1.5	1.5	2	16.5
1a to 3a to 5a**	2	4	1.5	1.5	1.5	4	21.5
1a to 3a to 5a to 5b	2	4	1.5	1.5	1.5	2	19.5
1a to 3b	--	8	1.5	1.5	1.5	4	22.5
1a to 3b to 5b	--	8	1.5	1.5	1.5	2	20.5
1a to 5a	2	8	1.5	1.5	1.5	4	25.5
1a to 5a to 5b	2	8	1.5	1.5	1.5	2	23.5
1a to 5b	4	8	1.5	1.5	1.5	2	25.5

*Cycle times do not include fill or heat times. **Factory setting.

Table 1

5.If access to the odd-numbered side of the timer is limited, remove the timer bracket mounting screws and rotate the timer.

6.Install or remove jumpers to achieve the desired cycle time. Figure 5 through Figure 15 illustrate the permissible jumper combinations.

NOTE: Do not remove the cover from the mechanical timer. Removing this cover will void the warranty.

No Jumpers Installed on the Board

Removing all the jumpers extends the cycle time, making it as long as possible. See Figure 5.

5b 5 5a

3b 3 3a

1b 1 1a

Figure 5

1a to 3a

This jumper configuration shortens the wash step from 8 minutes to 4 minutes. See Figure 6.

5b	5	5a
3b	3	3a
1b	1	1a

Figure 6

1a to 3a to 3b

This configuration eliminates the prewash step and shortens the wash step from 8 minutes to 4 minutes. See Figure 7.

5b	5	5a
3b	3	3a
1b	1	1a

Figure 7

20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232088