Alliance Laundry Systems EC001F, UW35M2, UW60M2 manual 17

Operation

Cycle Selection

The push button cycle selector switch on the control module provides a selection of four complete automatic cycles. See the table below for more information.

Press the START button to start the selected cycle.

Mechanical Timer Cycles

	Time			Program Water Temperature
Step		Water Level
	(Min)*		White	Permanent	Colors	Bright Colors
				Press
Prewash	2	High	Warm	Warm	Cold	Cold**
Drain	1
Auxiliary Heat Wash Step Temperature †			194 °F / 90 °C	140 °F / 60 °C	104 °F / 40 °C	86 °F / 30 °C
Wash	4
		Low	Hot	Warm	Warm	Cold
Drain	1
Extract	0.5
Rinse 1	1.5
		High	Cold	Cold	Cold	Cold
Drain	1
Extract	0.5
Rinse 2	1.5
		High	Cold	Cold	Cold	Cold
Drain	1
Extract	0.5
Rinse 3	1.5
Drain	1	High	Cold	Cold	Cold	Cold
Extract	4
Shakeout	0.5

*Cycle times are for the factory-preset jumper configuration and do not include fill and heat times. See the Programming section for more information.

**Auxiliary heat-equipped models only. Standard models do not have a prewash step in the Bright Colors cycle. †Auxiliary heat-equipped models only.

F232088 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 15