Installation/Operation Supplement
Dimensional Clearances
NOTE: The dimensions shown here are for planning purposes only. They are approximate and subject to normal manufacturing tolerances. If exact dimensions are required for construction purposes, contact the distributor or manufacturer. We reserve the right to make changes at any time without notice.
SF18VNV, SF25VNV, UF18VNV, and
UF25VNV Models
Both single and multiple machine installations require specified minimum clearances on all sides of each machine. Tables below show these clearances.
Recommended Minimum Clearances |
|
|
| ||
|
|
|
| ||
|
| 18 Pound | 25 Pound | ||
|
|
|
|
|
|
Minimum rear clearance, mm (in.) |
| 305 | (12) | 305 | (12) |
|
|
|
|
|
|
Minimum clearance between machine and wall, mm (in.) |
| 50 | (2) | 50 | (2) |
|
|
|
|
|
|
Minimum clearance between machines (side), mm (in.) |
| 25 | (1) | 25 | (1) |
|
|
|
|
| |
Minimum front clearance, mm (in.) |
| 406 | (16) | 445 (17.5) | |
|
|
|
|
|
|
| Table 4 |
|
|
| |
SF35-85PV, UF35-85PV, SF135-250PV, and
UF135-250PV Models
Recommended Minimum Clearances
|
|
|
| 135 |
| 250 Pound |
|
|
|
|
| Pound |
|
| |
| 35 | 50 | 85 |
|
|
| |
|
|
|
|
| |||
|
|
| Forward | ||||
| Pound | Pound | Pound |
|
| ||
|
|
|
| Standard | Standard | Tilt | Tilt |
|
|
|
|
|
| Option* | Option* |
|
|
|
|
|
|
|
|
Minimum rear clearance, | 450 (18) | 450 (18) | 450 (18) | 610 (24) | 610 (24) | 914 (36) | 914 (36) |
mm (in.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Minimum clearance between | 150 (6) | 150 (6) | 150 (6) | 457 (18) | 457 (18) | 457 (18) | 457 (18) |
machine and wall, mm (in.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Minimum clearance between | 25.4 (1) | 25.4 (1) | 25.4 (1) | 457 (18) | 457 (18) | 457 (18) | 457 (18) |
machines (side), mm (in.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Minimum front clearance, | 533 (21) | 584 (23) | 584 (23) | 584 (23) | 914 (36) | 914 (36) | 914 (36) |
mm (in.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* Machines equipped with the tilt option require a minimum overhead clearance as well. Refer to Figure 7 for the minimum overhead clearance for the 250 pound capacity model with tilt option.
Table 5
10 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232148 (EN) |