WE-6 Computer

1.Turn on main power source (circuit breaker).

2.Use left hand to press and hold the door unlock button on top of the door box cover. Use right hand to turn door handle counterclockwise and open door. Refer to Figure 15.

U153R

Figure 15

3.Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 16.

U003IE1A

U003IE1A

Figure 16

Installation/Operation Supplement

NOTE: For models with tilt, refer to “Loading Using Tilt Option” at the end of this section.

4.Close door and turn handle clockwise until it locks.5.Add powder supplies to supply dispenser.

NOTE: Liquid supplies may be injected directly into the supply dispenser by an external chemical supply dispenser. Refer to Installation and Programming manuals.

6.Select wash cycle from cycle charts located in the Programming section of the Programming Manual.

7.Enter the cycle number, 01-39, on the keypad. Refer to Figure 17.

Output Indicators

Supply 1

Heat

Supply 2

Forward

Supply 3

Reverse

Supply 4

Dist. Speed

Supply 5

Med. Speed

Cold Fill

High Speed

Hot Fill

Unlock Door

Spare

Drain Closed

Spare

Auxiliary 1

Signal

Auxiliary 2

U152R

Figure 17

8.Press the START key. Refer to Figure 17.

9.When cycle is complete and the display reads “DONE”, open door by pressing and holding the door unlock button.

10.Unload.

F232148 (EN)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

23