Alliance Laundry Systems F232148, F232148R2EN Operation, V-Computer

1 28

Installation/Operation Supplement

1.Turn on main power source (circuit breaker).

2.Turn on the ON/OFF switch on the front panel to the ON position. Refer to Figure 9.

3.Push button and turn handle clockwise. Refer to Figure 8.

U001IE1B

Figure 8

4.Press and hold the DOOR UNLOCK button on the left side of the control panel while performing the above step. Refer to Figure 8 and Figure 9.

5.Load to capacity whenever possible. DO NOT OVERLOAD. Refer to Figure 10.

U003IE1A

Figure 10

6.Close door and turn handle counterclockwise until button pops out. Refer to Figure 11.

U005IE1B

Figure 11

CFS1N

1DOOR UNLOCK Button

2ON/OFF Switch

Figure 9

F232148 (EN)

Contents

Page Page Table of Contents Safety Information Important Safety Instructions Page Installation General Specifications SF18VNV, SF25VNV, UF18VNV, and UF25VNV Models Power Consumption Cylinder Speeds SF35PV, SF50PV, SF85PV, UF35PV UF50PV, and UF85PV Models Balance Detection Electric Heating (Optional) SF135PV, SF250PV, UF135PV, and UF250PV Models Direct Steam Heating (Optional) 17.4 (7.91) Dimensional Clearances SF35-85PV, UF35-85PV, SF135-250PV,and UF135-250PVModels Dimensions SF18VNV, UF18VNV, SF25VNV, and Page SF35PV and UF35PV Models SF50PV, UF50PV, SF85PV, and UF85PV Models Page 135 Pound Capacity Models 250 Pound Capacity Models with Forward Tilt or Two-WayTilt Option Two-WayTilt with Forward and Two-WayTilt Option Operation V-Computer 7.Add liquid and/or powder supplies to supply dispenser. Refer to Figure a.Add detergent to container b.Add detergent or bleach to container c.Add softener to container 8. Press the START key. Refer to Figure WE-6Computer Two-WayTilt Machines Forward Tilt Machines Forward and Two-WayTilt Machines Disposal of Unit