|
| Programming | |
| Table 1 (continued) | ||
|
|
| |
Cycle Steps Available |
|
| |
(NOTE: WASH, ADD BLEACH, RINSE | Display | Setting Options for Cycle Steps | |
and SPIN LEDs light ONLY when a | |||
|
| ||
cycle formula is in operation.) |
|
| |
|
|
| |
Heat (Models with heat or heat capability) | HEAt | 00F (no heat for segment) or 80°F to 205°F | |
|
| 00C (no heat for segment) or 27°C to 95°C | |
| noHt | ||
|
| ||
|
|
| |
Drain (Final segment drains in stop | drAI | Drain or No Drain (if No Drain programmed, will skip spin | |
routine if No Drain is programmed) |
| segment associated with Drain segment) | |
nodr | |||
|
| ||
|
|
| |
Spin time | SPIn | 00 for No Spin or | |
|
| ||
|
|
| |
Wash 3 (displayed as “USH3”) |
|
| |
|
|
| |
Time for Agitation (excludes fill, drain, | GEnt | 0 or | |
spin and heat) |
| ||
norn | |||
|
| each agitation segment | |
Fill valves (temperature) | CFIL | Cold, Hot or Both (warm) water fills or Extra fill (must be | |
|
| configured for “EFIL” in SETUP Mode) | |
| HFIL | ||
|
| ||
|
|
| |
| bFIL |
| |
|
|
| |
| EFIL |
| |
|
|
| |
Fill water level control | LO | Low, Medium or High water level | |
|
|
| |
| nEd |
| |
|
|
| |
| HI |
| |
|
|
| |
Supply | SUP0 | SUP0 for No Supply or Supply | |
|
| operation of each supply selection) | |
| SUP1 | ||
|
| ||
|
|
| |
| SUP2 |
| |
|
|
| |
| SUP3 |
| |
|
|
| |
| SUP6 |
| |
|
|
| |
Heat (Models with heat or heat capability) | HEAt | 00F (no heat for segment) or 80°F to 205°F | |
|
| 00C (no heat for segment) or 27°C to 95°C | |
| noHt | ||
|
| ||
|
|
| |
Drain (Final segment drains in stop | drAI | Drain or No Drain (if No Drain programmed, will skip spin | |
routine if No Drain is programmed) |
| segment associated with Drain Segment) | |
nodr | |||
|
| ||
|
|
| |
Spin time | SPIn | 00 or | |
|
| increments) | |
|
|
| |
Wash 4 (displayed as “USH4”) |
|
| |
Time for Agitation (excludes fill, drain, | GEnt | 0 or | |
spin and heat) |
| ||
norn | |||
|
| each agitation segment | |
Fill valves (temperature) | CFIL | Cold, Hot or Both (warm) water fills or Extra fill (must be | |
|
| configured for “EFIL” in SETUP Mode) | |
| HFIL | ||
|
| ||
|
|
| |
| bFIL |
| |
|
|
| |
| EFIL |
| |
|
|
| |
Fill water level control | LO | Low, Medium or High water level | |
|
|
| |
| nEd |
| |
|
|
| |
| HI |
| |
|
|
|
Table 1 (continued)
F232157 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 19 |