NOTE: If the wash load becomes out of balance, the machine will attempt to balance the load. After three failed attempts the display will light the leftmost digit and a lower spin will be used to complete the cycle. Refer to Figure 4.
Programming
1
NORMAL PERM PRESS
WASH | HOT | WARM | |
ADD | NORMAL | PERM PRESS | |
BLEACH | |||
|
| ||
RINSE | WARM | COLD | |
| |||
SPIN | QUICK WASH | QUICK WASH | |
| |||
DOOR | START |
| |
HOT | WARM | ||
| |||
| HEAVY SOIL | DELICATE | |
| HOT | COLD |
CHM524R
1
|
| Figure 4 |
|
|
|
Supply Programmed | External Chemical Supply Signal | Compartment Flushed |
|
|
|
SUP0 | None | None |
|
|
|
SUP1 | Supply 1 | Compartment 1 |
|
|
|
SUP2 | Supply 2* | Compartment 2 |
|
|
|
SUP3 | Supply 3 | Compartment 3 |
|
|
|
SUP6 | Supply 6** | Compartment 1 and 2 |
|
|
|
| Table 2 |
|
*NOTE: ADD BLEACH LED lights if Supply 2 is the only supply programmed. If set up for "bEEP"(refer to SETUP Mode section), buzzer will sound on and off for the first eight seconds. The Supply 2 and ADD BLEACH LED remain on for 45 seconds or until the fill is complete, whichever comes first.
**NOTE: Selecting "EFIL" (Extra fill) in SETUP Mode will remove supply 6 as optional supply signals.
F232157 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 23 |