Alliance Laundry Systems F232182R1 22

Programming

p. The motor rotates clockwise (forward) at normal wash speed for 60 seconds. The display alternately flashes “norn” and “For”.

q.The display begins alternately flashing “drAI” and “For” (drain step, cylinder rotating at wash speed). The motor continues to rotate clockwise (forward) at normal wash speed for several seconds.

r.The motor accelerates to distribution speed. The display alternately flashes “drAI” and “dISt” (drain step, cylinder rotating at distribution speed).

s. The drain opens between 15 and 27 seconds into the drain step. The water level indicator lights on the display will begin to go out, one by one, as the machine drains past each water level.

t. The computer does not monitor the balance signal from the AC inverter drive.

u. The cylinder accelerates to low spin speed. The display shows “SPn1” (cylinder rotating at low spin speed). The basket rotates at low spin speed for 60 seconds.

v.The cylinder accelerates to medium spin speed. The display shows “SPn2” (cylinder rotating at medium spin speed). The basket rotates at medium spin speed for 60 seconds.

w.The cylinder accelerates to high spin speed. The display shows “SPn3” (cylinder rotating at high spin speed). The basket rotates at high spin speed for 60 seconds.

x.All outputs are turned off for roughly

90 seconds. The display shows “SdLY” (spin coast delay).

y.The computer performs the normal stop routine.

The door interlock is energized (allowing the door to be opened), provided that the water level switch indicates that water has fallen below low level and that the AC drive indicates that the motor has stopped.

F232182