Programming
Cycle Options
Cycle options are programmable options that are in effect for the duration of the selected wash cycle. These options include:
●Agitation action
●Agitation speed (defaults to normal wash speed regardless of setting)
●Recirculation pump enabled or disabled (for possible future application)
NOTE: Cycle option settings are unique to the cycle for which they are programmed.
Use the Up or Down key to change the selected option. Use the Start key to accept the selected option and move on to the next one.
Agitation Action
The programmer may choose among four agitation actions. Refer to Table 1.
Agitation Action Options
Display | Description | Percentage | |
|
|
| |
| 27 seconds forward, |
| |
Ag 1 | 3 seconds pause, | 90% | |
27 seconds reverse, | |||
|
| ||
| 3 seconds pause |
| |
|
|
| |
| 10 seconds forward, |
| |
Ag 2 | 20 seconds pause, | 33% | |
10 seconds reverse, | |||
|
| ||
| 20 seconds pause |
| |
|
|
| |
| 3 seconds forward, |
| |
Ag 3 | 27 seconds pause, | 10% | |
3 seconds reverse, | |||
|
| ||
| 27 seconds pause |
| |
|
|
| |
| 4 seconds forward, |
| |
Ag 4 | 56 seconds pause, | 6.7% | |
4 seconds reverse, | |||
|
| ||
| 56 seconds pause |
| |
|
|
| |
| Table 1 |
|
The selected agitation applies to the entire cycle. It is possible to progam a different agitation action for each of the 30 cycles. When “Ag 3” or “Ag 4” is in effect, there is no agitation during the fill.
Agitation Speed
If “AgSn” or “AgSL” is selected, the machine will default to normal wash speed regardless of the setting.
Recirculation Pump
This cycle option setting is intended to be used with a possible future recirculation application. Selecting either “nPnP” or “PUnP” will have no bearing on the wash cycle. However, the “nPnP” setting is recommended to prevent the corresponding output on the output board from energizing.
Press the Start key after selecting this last cycle option setting to begin editing the cycle segments.
Segment Programming
All cycle programs (“CY01” – “CY30”) can be customized within a preset program structure. Each cycle program consists of eleven program segments. Refer to Table 2.
Cycle Program Segments
Segment |
| Display |
|
|
|
PreWash |
| PrE |
|
|
|
Wash |
| UASH |
|
|
|
Fill 1 |
| FIL1 |
|
|
|
Fill 2 |
| FIL2 |
|
|
|
Fill 3 |
| FIL3 |
|
|
|
Fill 4 |
| FIL4 |
|
|
|
Fill 5 |
| FIL5 |
|
|
|
Fill 6 |
| FIL6 |
|
|
|
Fill 7 |
| FIL7 |
|
|
|
Fill 8 |
| FIL8 |
|
|
|
Fill 9 |
| FIL9 |
|
|
|
| Table 2 | |
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | F232182 |