Step 3:

Connect Drain Hose to Drain Receptacle

Remove the drain hose from its shipping position on the rear of the washer by unhooking the hose from the retainer clamp.

IMPORTANT: Drain receptacle must be capable of handling a minimum of 1-3/8 inch (35 cm) outside diameter drain hose.

RETAINER

CLAMP

H101IE1A

Standpipe Installation:

Place the drain hose into the standpipe.

Remove the beaded tie-down strap from accessories bag and place around standpipe and drain hose and tighten strap to hold hose to standpipe. This will prevent the drain hose from dislodging from drain receptacle during use.

24" to 36"

(61 to 91.44 cm) Recommended Height

STANDPIPE

2" (5.08 cm) or 1-1/2" (4 cm)

H102IE1A

685945

9