Moving Washer to a New Location . . .
To prevent damage while moving the washer, the shipping materials MUST be reinstalled.
Reinstallation of Shipping Materials
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers. See illustration.
Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and washers. See illustration.
Reinstall front access panel.
SHOCK SLEEVES
HOOKED | MOTO |
END OF | |
SHIPPING | MOUN |
BRACE |
|
BOLTS
Refer to Installing Your Washer section for proper procedures whenever the washer is moved.
12 | 685945 |