5.Add liquid and/or powder supplies to supply dispenser. Refer to Figure 7.

a.Add detergent to container 1.

b.Add softener to container 3.

For non-coin models: Liquid supplies may be injected directly into the supply dispenser by an external chemical supply dispenser. Refer to Installation and Programming Manuals.

6.Press the Up or Down key to select wash cycle. Press the Start key. Refer to Figure 8.

WARNING

To avoid personal injury, recommended inlet water temperature should be no higher than 125° Fahrenheit (51° Celsius).

Operation

7.For coin models: Insert required number of coins to start machines. Refer to Figure 7.

8.For non-coin models: Press the Start key. Refer to Figure 8.

CYCLE SELECTION

UP DOWN START STOP

1

W709

3

2

B157R

B157R

U137R

Figure 8

9.When applicable, add bleach to container 2 when the display reads “bLCH”. Refer to Figure 9.

1Detergent

2Bleach

3Softener

Figure 7

CYCLE SELECTION

UP DOWN START STOP

CHM2221N

Figure 9

NOTE: To stop a cycle at any time, press the Stop (non-coin models only) key.

NOTE: To display the temperature of the water while a cycle is running, press the Up key. To display the number of the cycle in progress, press the Start key.

F232137

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

15