Alliance Laundry Systems manual 23

6.Clean customer-supplied steam filter, where applicable. Refer to Figure 13.

a.Turn off steam supply and allow time for the valve to cool.

b.Unscrew Cap.

c.Remove Element and clean.

d.Replace Element and Cap.

1

2

H042

H042I

1Cap

2Filter Element

Figure 13

Maintenance

7.For variable speed and F-speed models only, measure the out-of-balance switch gap setting and adjust it as needed. The switch gap settings are listed in the Installation manual, which is supplied with the machine.

8.Check the bearing mounting bolts to make sure they are torqued properly. Refer to Table 8 for specifications.

Machine	Bearing	Torque
Capacity
18-25	All	75 ft.-lbs.
27-60	All	105 ft.-lbs.
80	Front	200 ft.-lbs.
80	Rear	97 ft.-lbs.
125	Front	500 ft.-lbs.
125	Rear	140 ft.-lbs.

Table 8

F232137 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 21