Alliance Laundry Systems manual Quarterly

Maintenance

4.Remove back panel, and check overflow hose and drain hose for leaks.

5.Unlock the hinged lid, and check the supply dispenser hoses and hose connections.

6.Clean inlet hose filter screens:

a.Turn water off and allow valve to cool, if necessary.

b.Unscrew inlet hose and remove filter screen.

c.Clean with soapy water and reinstall. Replace if worn or damaged.

7.Tighten motor mounting bolt locknuts and bearing bolt locknuts, if necessary.

8.Use compressed air to clean lint from motor.

9.Clean interior of machine, both basket and shell, by wiping with a water-soaked sponge or cloth.

10.Use compressed air to ensure that all electrical components are free of moisture and dust.

11.Verify the insulation is intact on all external wires and that all connections are secure. If bare wire is evident, call a service technician.

12.For variable-speed models only, clean AC drive cooling fan blades monthly (more often if required by the condition of the air).

a.Open the top cover and remove the control module cover.

b.Gently wipe the fan blades clean with a dry cloth.

Quarterly

NOTE: Disconnect power to the machine at its source before performing the quarterly maintenance procedures.

1.Tighten door hinges and fasteners, if necessary.

2.Using a Teflon-based spray lube, lubricate the door lock by applying the spray to the door lock pin while turning the door handle.

3.Tighten anchor bolts, if necessary.

4.Verify that the drain motor shield is in place and secure.

5.Check all painted surfaces for exposed metal. (Matching paint is available from the manufacturer.)

●If bare metal is showing, paint with primer or solvent-based paint.

●If rust appears, remove it with sandpaper or by chemical means and paint with primer or solvent-based paint.

20 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232137