Alliance Laundry Systems PHM1397C General Operation Instructions, Operating PS40 Control

Operation

General Operation Instructions

1.Make sure machine has been installed properly and that water and electrical services are on.

2.Sort laundry according to care labels, type, etc.

3.Open door and make sure that machine is empty.

4.Load goods to be processed into drum.

5.Close and lock door securely by pushing in on door handle – it should click twice.

6.Open supply dispenser, slide out dispenser cups one at a time and fill with appropriate chemicals. Replace cups.

7.Close supply dispenser door.

8.Enter number of desired program. Refer to Operating PS40 Control section. Programs 0 – 9 have been preprogrammed at factory for typical conditions. Preprogrammed formulas may vary, so a Programming Manual will be provided to document preprogrammed formulas.

9.Press START button on control.

10.Machine door will automatically lock and selected formula will be executed.

11.When program is completed, display will show message “open door” and door will automatically be unlocked.

12.Open door by pushing door release panel and remove all goods.

WARNING

Never use flammable materials of any kind in the machine! Never use any solvent other than water!

W686

Operating PS40 Control

Running a Program:

1.Make sure loading door is closed and locked.

2.Enter 2 digit program number corresponding to desired program.

3.Press START button.

Stopping a Program:

1.Press STOP button and wait for door to be unlocked.

2.Open loading door.

3.Close loading door.

4.Press STOP button – program will be aborted.

5.Open and close loading door again and program will be cleared and aborted. Display will return to “Start”.

Fast Advancing a Program:

1.Press and hold ENTER button and program time will advance.

2.When program time pauses, release ENTER button. To continue to end of program, continue holding ENTER button.

When PS40 Control fast advances it will pause whenever it comes to beginning of a drain or agitation routine.