Maintenance

Quarterly

NOTE: Disconnect power to washer-extractor before performing quarterly maintenance procedures.

1.Tighten door hinges and fasteners, if necessary.

2.Tighten anchor bolts, if necessary.

3.Verify that drain motor shield is in place and secure.

4.Check all painted surfaces for bare metal. (Matching gray paint is available from manufacturer.)

a.If bare metal is showing, paint with primer or solvent-based paint.

b.If rust appears, remove it with sandpaper or by chemical means. Then paint with primer or solvent-based paint.

5.Clean steam filter, where applicable.

a.Turn off steam supply and allow time for valve to cool.

b.Unscrew nut.

c.Remove element and clean.

d.Replace element and nut.

18

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F8112201