Before You StartTools

For most installations, the basic tools you will need are:

Installation

Exhaust

Use rigid metal duct and exhaust the dryer to the outside by the shortest route possible.

1

2

3

5

4

D818I

1Wrench

2Screwdrivers

3Level

4Teflon Tape

5Duct Tape

Figure 3

Gas

Dryer is equipped for Natural Gas with a 3/8" N.P.T. gas supply connection. For more detailed information, refer to section on Gas Requirements.

Location

Place the dryer on a solid floor with an adequate air supply. For more detailed information, refer to section on Location Requirements.

D354I

Figure 4

NOTE: For more detailed information, refer to section on Dryer Exhaust Requirements.

Electrical●ELECTRIC DRYER

Dryer needs a 3 or 4 wire 120/240 or 120/208 Volt, 60 Hertz, 30 Amp, AC single phase electrical supply for each unit.

●GAS DRYER

Dryer needs a 120 Volt, 60 Hertz, 15 Amp, polarized 3-slot effectively grounded receptacle for each unit.

NOTE: For more detailed information, refer to section on Electrical Requirements.

510975

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

13