Installation

Lint Filter

CLEAN THE LINT FILTER BEFORE DRYING EACH LOAD. (Refer to Figure 28 for lint filter location.) Cleaning the lint filter is important because a layer or pad of lint on the filter will block the flow of air through the dryer, thus reducing the efficiency of the dryer. The clothes will take longer to dry and energy will be wasted.

Motor Overload Protector

The motor overload protector stops the motor and shuts the heat off automatically in the event of an overload. After cooling, the overload protector will reset itself. The dryer can be restarted by pressing the PUSH-TO-START button. If the overload protector cycles again, remove the dryer from use and call the service person to correct the problem.

1

D608I

D608I

1Lint Filter

Figure 28

40

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

510975