Alliance Laundry Systems Stacked Clothes Dryer PRESS, FLUFF, NORMAL, IN USE, IN USE, (NO HEAT), PERM DELICATE, FABRIC SELECTOR, Step 6: Start Dryer, Step 5: Set Fabric Selector

Operation

Step 5: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS for permanent press, DELICATE for sensitive items or FLUFF (NO HEAT) for items that require no heat.

NOTE: Always follow manufacturer’s care label instructions.PERM DELICATEPRESS

NORMAL	FLUFF
	(NO HEAT)

FABRIC SELECTOR

D342I

Figure 33

Step 6: Start Dryer

Metered Models

Place coin(s) in slide and carefully push in as far as possible and then pull slide out as far as possible. After IN USE light comes on (indicating start of cycle), press the PUSH-TO-START button.

METERED MODELS

D363I

Figure 34

Nonmetered Models

Rotate timer knob to desired time setting (up to

60minutes). Press the PUSH-TO-START button. IN USE light will come on (indicating start of cycle).

D773I

NONMETERED MODELS

D773I

Figure 35

Remove knits when slightly damp because overdrying may cause shrinkage. Do not tumble dry knit woolens.

Should dryer stop before cycle is completed, the motor overload protector may have cycled. Refer to page 40.

42 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510975