NOTE: Some models come without an electrical plug installed. If washer is not hard wired (refer to Figure 19), a suitable plug that meets local electrical standards, including earthing requirements, must be installed. Refer to the washer nameplate for proper voltage and Hertz the washer is designed to operate on. Refer to Figure 18.

WARNING

To reduce the risk of electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to the electrical power source.

W031

120 Volt/50 Hertz

This washer is designed to be operated on a separate polarized three-wire, earth (grounded) 120 Volt,

50 Hertz, single-phase electrical circuit protected by a 15 ampere fuse, equivalent fusetron or circuit breaker.

DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT WHEN THE WASHER IS OPERATING.

240 Volt/50 Hertz

This washer is designed to be operated on a separate polarized three-wire, earth (grounded) 240 Volt,

50 Hertz, single-phase electrical circuit protected by a 10 ampere fuse, equivalent fusetron or circuit breaker.

DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT WHEN THE WASHER IS OPERATING.

230 Volt/50 Hertz

This washer is designed to be operated on a separate polarized three-wire, earth (grounded) 230 Volt,

50 Hertz single-phase electrical circuit protected by a 10 ampere fuse, equivalent fusetron or circuit breaker.

DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT WHEN THE WASHER IS OPERATING.

Installation

1

W334I

1Nameplate

Figure 18

240 Volt/60 Hertz

This washer is designed to be operated on a separate polarized three-wire, grounded 240 Volt, 60 Hertz, single-phase electrical circuit protected by a

10ampere fuse, equivalent fusetron or circuit breaker.

DO NOT OPERATE OTHER APPLIANCES ON THE SAME CIRCUIT WHEN THE WASHER IS OPERATING.

Earthing (Grounding) Instructions

The washer must be earthed (grounded). In the event of malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for electric current. The washer is equipped with a cord having an equipment-earthing conductor. Some models are also equipped with a three-prong earthing plug. The washer must be plugged or hard wired into an appropriate power source that is properly installed and earthed in accordance with all local codes and ordinances.

WARNING

Improper connection of the equipment- earthing conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the washer is properly earthed.

W032

Do not modify the plug provided with the washer — if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

38900

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

15