Installation

PLUG W403I

HARD WIREDW402I

W403I

W402I

NOTE: Electrical receptacle must be located so that it is easily accessible with machine in place. If machine is hard wired, an intermediate shut-off box with a 3 mm gap is required to meet EN 60335-1, clauses 24.3 and 22.2 or 3.5 mm gap is required to meet Standard IEC 60335-1, clauses 24.3 and 22.2. Gap is defined as the minimum contact separation of each pole in the switch between the “ON” and “OFF” positions.

Figure 19

16

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

38900