Alliance Laundry Systems W001C Step 1: Remove the Shipping Brace and Shipping Plug, Step 2: Wipe Out Inside of Washtub, Installing the Washer

Installing the Washer

NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.

Step 1: Remove the Shipping Brace and Shipping Plug

NOTE: Install dryer before washer. This allows room for attaching exhaust duct.

Remove the shipping brace from under the lid. The plastic shipping plug will be released from the base of the washer when removing the cardboard base from the washer.

Installation

Step 2: Wipe Out Inside of Washtub

Prior to first wash, use an all purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub.

W371I

Figure 3

TLW521N

1Shipping Brace

2Shipping Plug

Figure 2

NOTE: Do not tilt washer to front or sides when moving.

The shipping brace and plug should be saved and must be reinstalled whenever washer is moved or transported to a new location. This will prevent damage to washer components.

NOTE: Refer to your Operating Instructions for reinstalling shipping brace and shipping plug.

38900