Allied Telesis 2.6.1 manual Normal Mode and Security Mode, Operating the switch

Operating the switch 47

See the Operations chapter in the AT-8800 Series Switch Software Reference for:

■More information about managing and using accounts with user, manager and security officer privileges

■A full list of commands that require security officer privilege when the switch is in secure mode

■Information about enabling a remote security officer.

Normal Mode and Security Mode

The switch operates in one of two modes, either normal mode or security mode. By default, the switch is in normal mode.

When the switch is in security mode, the command SHOW DEBUG does not display output of the SHOW FEATURE and SHOW CONFIGURATION DYNAMIC commands, or the current configuration in the SHOW SYSTEM output unless the SHOW DEBUG command is entered by a user with security officer privilege.

If you wish to use the following software features you need to enable security mode:

■IP authentication

■Secure Shell (see the Secure Shell chapter, AT-8800 Series Switch Software Reference)

■Encryption (see the Compression and Encryption Services chapter, AT-8800 Series Switch Software Reference)

■IPsec (see the IP Security chapter, AT-8800 Series Switch Software Reference)

■Public Key Encryption (PKI) (see the Public Key Infrastructure chapter, AT- 8800 Series Switch Software Reference)

■Secure Sockets Layer (SSL) (see the Secure Sockets Layer chapter, AT-8800 Series Switch Software Reference)

To enable security mode, first create a user with security officer privilege, then enter the command:

ENABLE SYSTEM SECURITY_MODE

To access secure functionality you will need to log in again as the security officer.

When the switch restarts, it restarts in the same normal mode or security mode as it was before restarting. To restore the switch to normal operating mode, enter the command:

DISABLE SYSTEM SECURITY_MODE

When security mode is disabled, the switch automatically deletes all sensitive data files, including encryption keys.

To display the current operating mode, enter the command:

SHOW SYSTEM

Software Release 2.6.1 C613-02039-00 REV A