11.10 Eject Disc
11.10 Eject Disc
The Eject Disc setting controls the ejection of discs by the target drive. Three options are available:
•Eject Good Only – This option ejects only successfully copied discs. This is the default setting
•Eject All Disc – This option ejects successful and failed copy discs.
•Do Not Eject – With this option, the disc remains in the target drive. Manual ejection is required after every copy operation.
11.11 Burn on the Fly
The Burn on the Fly function enables you to control the copy operation. When the setting is ON, data is copied directly from the source DVD to the target DVDs. When the setting is OFF, the DVD/CD Duplicator first loads the data into a partition on the hard disk drive, then copies the data to the target DVDs.
11.12 Burn Mode
The Burn Mode setting enables you to select from two writing methods for
•Disc At Once (DAO)
•Track At Once (TAO) DAO is the default setting.
11.13 Display Time
The Display Time function displays the total time of each copy operation. The default setting is OFF.
11.14 Button Sound
The Button Sound setting turns the button sound on or off. The default setting is ON.
11.15 Device Info
The Device Info function displays information for both the source and target drives.
Rackmount DVD/CD Duplicator User’s Manual | 19 |
