Tascam DV-W11R user manual Load Default, 12.11 CD+G, Isrc & MCN, CD-Text, Use Big Block

12.10 Load Default

12.10 Load Default

The Load Default function resets all settings to factory default values. It is recommended that you reset to the default values if the DVD/CD Duplicator fails to function properly after you make changes to the original configuration. To execute the Load Default function, follow the steps below:

1.Press and hold down the (ESC) button for two (2) seconds until you hear a beep.

2.Press the down arrow to display 12.10 Load Default.

3.Press the (ENT) button.

The system displays the message: Load Default Config? Yes.

4.Press the (ENT) button.

The system starts loading the default data. When the loading operation is complete, the system displays the message: Load Default OK.

5.Press the (ESC) button twice, then press the down arrow to return to the main menu.

The system displays 1.Copy.

12.11 CD+G

The CD+G function enables or disables CD+G (karaoke CD) format support. The default setting is OFF.

Note: The CD+G value must be set to OFF before you can use the Track Extraction features.

For more information about CD+G discs, see item 7 in the FAQ on page 27.

12.12 ISRC & MCN

The ISRC & MCN function enables or disables ISRC and MCN format support. The default setting is OFF.

12.13 CD-Text

The CD-Textfunction enables or disables the copying of CD-Text discs. The default setting is OFF.

For more information about CD-Text discs, see item 8 in the FAQ on page 27.

12.14 Use Big Block

This function is not available in the 2U Rackmount Duplicator.

22 Rackmount DVD/CD Duplicator User’s Manual